加工定制:是 | 品牌:UL | 型号:TC-ER/VNTC |
产品认证:UL1277 | 护套材质:PVC | 线芯材质:裸铜线 |
Electrical Power and Control Tray Cable (TC) 美标UL1277 托架电缆
PVC外护套,内嵌THHN尼龙护套线芯
UL1277 TC cable UL认证
Description of the purpose
Type
TC Control Cable is for use in industrial power or control circuits
where small diameter, flame retardant cables are desired. Primary
installations include cable trays, raceways, and outdoor locations where
supported by a messenger wire. Type TC is also listed for direct burial
and for use in Class 1, Division 2 hazardous locations and Class 1
control circuits. Conductors may be used at temperatures not to exceed 75°C in wet locations or 90°C in dry locations.
Standard
UL 83,UL66, UL 1277, UL 1581
Specification and Construction
Type
TC Control Cable is available in sizes 18 AWG through 10 AWG, with
multiconductor constructions of two through 37 conductors. The product
uses Type THHN or THWN conductors in sizes 14 AWG through 10 AWG.
Individual conductors are bare annealed copper covered with a polyvinyl
chloride (PVC) insulation over which a nylon (polyamide) or UL listed
equal jacket is applied. The overall jacket consists of a heat, moisture
and sunlight resistant PVC. Non-halogen jacket available upon request.
1, Qingdao Cable offers in three and four conductor cables in sizes AWG
14, 12, 10, with a green insulated ground wire using ICEA color code
Method 1, Table 2.
2, Three and four conductor cables in sizes AWG 14, 12, 10, including a
green insulated ground wire are UL listed for open wiring per NEC 336.10